TOOL STORAGE

Teng Tools tool boxes and roller cabinets have been designed to meet the high demands made by quality conscious professionals from all over the world. No details are left to chance when our tool boxes and roller cabinets are manufactured. The range comprises 8 top boxes, 2 middle boxes, 11 different roller cabinets and 5 side cabinets. These can all be combined with Teng Tools tool storage systems with over 160 different TT trays in various sizes.

• Side handles on all top and middle boxes are rubber coated, which gives a comfortable grip when the boxes need to be carried.
• All roller cabinets are equipped with rubberised transport handles so that it is easier to move them and the handles feature a soft comfortable grip.
• All Teng Tools tool boxes and roller cabinets are made of strong, high quality steel, which gives the drawers a longer life and greater stability. The drawers are powder coated with rust protection in five stages as well as an under coat that extends the life of the surface finish.
• Most Teng Tools roller cabinets are equipped with 5″ stable castors, which makes them easy to move. The wider cabinets are equipped with 6″ castors. The castors are positioned in the corners of a U-shaped castor frame, which provides extra strength and stability.
• All drawers are equipped with three-step ball bearing slides so the drawers are easy to open and are also fully extendable, which gives better access to the tools.

120208_111552_14_d700_NIKredigerad

DO'S AND DONT'S

• Keep it covered
Use the Teng Tools tool box covers or another suitable cover to protect the tool boxes when they are not been used.

• Make it secure
If you are building a stack system use the Teng Tools TCF01 and TCF02 fixing brackets and fixings provided to secure each component to the stack

• Water and chemical damage
If any liquid spills on to the paint surface inside or outside the tool box clean it off immediately to protect the paint surface

• Watch your weight
Spread the weight of tools between the drawers and put the heavier tools in the lower drawers

• Regular maintenance
The drawer runners, ball bearing slides, hinges, locks, etc should all be lubricated with a light oil on a regular basis

• Repair or replace any damaged parts
All moving parts are subject to wear and should be replaced when worn – Teng Tools offer a full spare parts programme, full details are available from your local Teng Tools stockist

• Don’t overload your tool box
Never overfill drawers or put too much weight in one drawer

• Do not lift more than you should
Follow established rules and guidelines – if it is more than 25 kilos you should not lift it on your own

• Don’t climb on the tool boxes
Tool boxes are for storing tools do not use them as a ladder

• One drawer at a time
Be aware of the balance of your tool box, opening more than one drawer at a time can cause it to tip over

• Do not shake the tool boxes about
If the tool box has to be transported in a vehicle it should be fixed down firmly as the drawers, wheels and welding points can all be damaged by being bounced round

When wheeling over an uneven surface be careful as this can also lead to damage particularly if the tool box is heavily loaded.