International
Ireland
Australia
Austria
Belgium
Denmark
Estonia
Finland
France
Germany
Italy
Latvia
Lithuania
Netherlands
New Zealand
Norway
Poland
Portugal
South Africa
Spain
Sweden
Taiwan
United Kingdom
USA
Story / 28/03/2023
How to change the code on TengTools tool storage
As avid tool users, we understand the importance of keeping your tools safe and secure, which is why we’d like to show you how to change the code on your TengTools tool storage. The combination locks are very user-friendly and can be found in cabinets, tool chests, and wall cabinets. With these clear and concise instructions, we hope you will feel confident in changing the lock on your tool kit.
As you may already know, the default combination for all TengTools combination locks is "010". It's important to change it to add an extra layer of security to your tools, keeping them safe from prying hands and potential intruders.
To begin, you'll need to unlock and open your tool storage. If you're using a type of storage with an easy-to-see mechanism, like a tool chest with a flip-up cover, it should be very straightforward to locate the small switch on the backside of the combination lock. The switch has an "N" and an "S" on either side. Move the switch over to the "S" position, and you're ready to set your new combination.
Once the new combination is set, flip the switch back to its original position “N”. You can then lock the cabinet, roll the numbers, and the new combination is set. Select a number that's easy for you to remember, and avoid the most obvious combinations. The most important thing is to not use the default combination.
However, if your storage unit has a lock that is a bit more challenging to access like on tool cabinets, don't worry; we’ll guide you through it. If there’s not enough space for your hands, you can remove some of the tool trays to create the space you need. Simply move your tool sets out of the way, and you'll have plenty of space to work with. The rest of the procedure is the same as for all TengTools combination locks. Once you've pushed the switch up to “S”, enter your new combination, and then pull the switch back down to “N” again. Your lock is now secure, and your combination has been changed. Again, choose a combination that you can easily remember but different from the default “010”-combination.
In conclusion, changing the combination on your TengTools cabinet is an easy and straightforward process that you can do yourself. And with the right combination, you can rest assured that your tools are secure and safe from unauthorized access. So go ahead and give it a try!
There's an instructional video with subtitles on our Youtube channel where Vanessa Ruck, aka "The Girl On A Bike", shows the procedure from start to finish for those of you who prefer that format.
Topic in this article
Story
More articles
18/12/2023
Breaking barriers - The world wind-powered land speed record
Glenn Ashby’s move from sailing to chasing the world wind-powered land speed record opened a new and significant chapter for Emirates Team New Zealand. The transition from an aquatic to a land-based challenge meant embarking on a project that turned out to be laden with logistical and environmental obstacles that put their adaptability and resilience to the test. In the arid surroundings of Lake Gairdner, the team found that the changeable weather conditions on land were as unpredictable as those they had learned to master at sea.
11/09/2023
How customized tool storage transforms offshore wind farm operations
In the ever-evolving world of renewable energy, efficiency and safety are paramount. Ensuring tools are readily available and easily accessible, especially in challenging environments such as offshore wind farms, can make a significant difference in operations. Here we will share the inspiring story of Vattenfall, a leading player in the offshore wind energy sector, and how they significantly improved their productivity and safety by implementing our customized hand tool storage and bespoke hand tool sets.
30/03/2023
Tips and hints - How to change seasonal tyres
Every car owner know the importance of being properly geared up appropriately no matter the season. Up here in the Nordics we get to enjoy not only the wonderful change of seasons, but also the changing of seasonal tyres. Many take their car to a mechanic, but why not save yourself some coin and take on the challenge yourself?
29/03/2023
Embracing sustainability - Efforts to reduce waste and preserve resources
Toolmaking has been around for millions of years and is an integral part of everyday life. It’s no secret that modern manufacturing and consumption is problematic from an environmental perspective, and the toolmaking industry is no exception. However, we need tools to manufacture the technology of the future, to prolong the lifespan of things already manufactured and to improve upon that which no longer serves the planet.
03/02/2023
Key considerations for hand tool storage optimisation
Recently we had the pleasure of visiting Vanessa Ruck and talk about how to organise a tool chest. Being a super talented motorcycle rider, she sure knows how organising a tool chest is crucial for improving work efficiency, saving time on the job, and avoiding accidents.
27/09/2022
T Sport Bernau adds another notch to the belt - 2022 FIA ETRC
Recently the T Sport Bernau team travelled to Le Mans, France for the penultimate round of the 2022 FIA Goodyear European Truck Racing Championship. The championship is a great event for fans and visitors with tons of action not only on the track. Show trucks, stunt performances and fireworks served as an awesome backdrop to a variety of entertainment as well as rows of trade stands packed with all kinds of gizmos.
11/07/2021
Hydro Thunder – GP Hydroplane series
Miss Marsden Cove 'Teng Tools' is a Grand Prix hydroplane powered by a 468 cubic inch Chev reaching speeds of 273 km (170mph) the fastest automotive powered boats on the water in the world.